Page 1 of 6 1234 ... LastLast
Results 1 to 10 of 59
  1. #1
    Freak Poster ..::GSM CLUB™::..'s Avatar
    Join Date
    Feb 2015
    Posts
    266
    Post Thanks / Like
    Rep Power
    5

    Default Successfully unlocked/repaired phones by Infinity-Box

    World's 1st Vodafone Smart First 6 Direct unlock done





    › See More: Successfully unlocked/repaired phones by Infinity-Box

  2. #2
    Freak Poster ..::GSM CLUB™::..'s Avatar
    Join Date
    Feb 2015
    Posts
    266
    Post Thanks / Like
    Rep Power
    5

    Default Read factory firmware done

    Reading Flash Conent now ...

    Brand : Vodafone
    ProdName : VF695
    ProdModel : VF695
    Device : VF695
    AndroidVer: 4.4.2
    MTKxCPU : MT6572
    MTKxPRJ : ALPS.KK1.MP6.V1

    [Read Ok] : preloader_pixi34_vf.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : custpack.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6572 / V1.1.1 / pixi34_vf / EMMC
    FW Size : 1102 MiB
    Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__Vodafone__VF69 5__VF695__4.4.2__ALPS.KK1.MP6.V1\

    All done!

    Done!
    Elapsed: 00:05:58
    Reconnect Power/Cable!

  3. #3
    VIP MEMBER
    Join Date
    Apr 2010
    Location
    Bangladesh
    Posts
    174
    Post Thanks / Like
    Rep Power
    10

    Default


    SYMPHONY FEATURE PHONE MODEL-L22
    READ SECURITY CODE DONE


    Code:
    Operation : Read UserCode [ v1.44 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey ( '*' )
    
    Wait for phone...
    Phone found! [ 7 ]
    Sync...
    Sync Ok, read regs...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 6261
    BB_CPU_HW : CB01
    BB_CPU_SW : 0001
    BB_CPU_SB : 8000
    BB_CPU_NM : [MediaTek] MT6261_S0000
    BB_CPU_SN : DAF3B57792BF91706D5D748BB196F4CD
    BROM Protocol Version : 05
    Setting...
    Setting done , result code 0x000E
    BROM stage done
    Seek and prepare DownloadAgent
    DownloadAgent matching HW Found!
    DA verify and select done
    Sending DA to target ...
    DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
    DA_CSTAT  : 0x5A
    SOC_VERIFY : 0xC1
    BOOT_STYLE : SF_FLASH_BOOT
    NOR Flash IC initialized
    [0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
    [0] : FLASH_DIE : 00C2 0020 0016 0000 
    [0] : FLASH_LEN : 0x00300000
    INT_RAM : 0x0000D000
    EXT_RAM : 0x00400000
    SDS_INFO : 0x002FE000 , 0x00002000
    
    Read ExtData
    Sorting ExtData
    Reading UserCode
    
    Active : Yes , Code : 3366
    
    Privacy Lock :C
    
    Done!
    Elapsed: 00:00:08
    Reconnect Power/Cable!
    BR,

    ASM_FARUQUE

    If My Post Is Helpful-

    Just Press On THANKS

  4. #4
    Freak Poster ..::GSM CLUB™::..'s Avatar
    Join Date
    Feb 2015
    Posts
    266
    Post Thanks / Like
    Rep Power
    5

    update spd sc7731 imei repair done


  5. #5
    Administrator
    Join Date
    Apr 2015
    Posts
    197
    Post Thanks / Like
    Rep Power
    10

    Default Q-WAVE 70M2 RockChips CPU Flashing



    Code:
    Card found: S/N : 42Axxxxx , v0130
    Chinese Miracle II  [RKT Module] v 1.0
    
    Connect device to PC!
    Hold 'VolUp'+'VolDown' or 'VolUp', insert USB cable, press 'PowerOn'!
    
    
    Selected   : RK2928__Q-WAVE 70M2__rk292x__eng.incar.20150205.183124.irkfw
    FastVerify : Ok , 0x32D6D6AE
    FwInfoBlk  : 0x0009
    Load Ok!
    
    Found active FlashInterface , connecting ... 
    Detected : RKxxxx [General Info not found!]
    Read Info Ok!
    
    Operation : Flash [ v1.0 ]
    
    INFRK Image : RK2928__Q-WAVE 70M2__rk292x__eng.incar.20150205.183124.irkfw
    Will flash INFRK image now...
    
    Update PMT ...
    Prepare ... 
    Update ... 
    Update Ok!
    
    Flashing now : MISC
    Prepare ... 
    Writing ... 
    Flash Ok!
    
    Flashing now : BOOT
    Prepare ... 
    Writing ... 
    Flash Ok!
    
    Flashing now : RECOVERY
    Prepare ... 
    Writing ... 
    Flash Ok!
    
    Flashing now : BACKUP
    Prepare ... 
    Writing ... 
    Flash Ok!
    
    Flashing now : CACHE
    Prepare ... 
    Writing ... 
    Flash Ok!
    
    Flashing now : USERDATA
    Prepare ... 
    Writing ... 
    Flash Ok!
    
    Flashing now : ANDROID
    Writing ... 
    Flash Ok!
    
    
    UIMG write finished sucessfully, resul : 0x08
    Elapsed: 00:03:18
    
    Connect device to PC!
    Hold 'VolUp'+'VolDown' or 'VolUp', insert USB cable, press 'PowerOn'!

  6. #6
    Administrator
    Join Date
    Apr 2015
    Posts
    197
    Post Thanks / Like
    Rep Power
    10

    Default Hisense_U601 Flashing



    Code:
    Loading    : Hisense_U601_W503_M00_S10_150604.pac
    CRVersion  : BP_R1.0.0
    PacCPUinfo : SC77xx
    PacVersion : Hisense_U601_W503_M00_S10_150604
    FastCheck  : 0x0036C58406
    
    Loading files ... 
    
    File : fdl1.bin
    File : fdl2.bin
    File : nvitem.bin
    File : nvitem_wcn.bin
    File : prodnv.img
    File : u-boot-spl-16k.bin
    File : SC7702_sc7731g_band128.bin
    File : DSP_DM_G2.bin
    File : SC8800G_x30g_wcn_dts_modem.bin
    File : boot.img
    File : recovery.img
    File : system.img
    File : userdata.img
    File : Logo.bmp
    File : Logo1.bmp
    File : cache.img
    File : u-boot.bin
    File : SC77xx.xml
    
    Load Ok!
    
    Operation : Flash [ v1.16 ]
    
    ======= Flash
    Files set for flashing : 
    [ MCU ] : Hisense_U601_W503_M00_S10_150604.pac
    CRVersion  : BP_R1.0.0
    PacCPUinfo : SC77xx
    PacVersion : Hisense_U601_W503_M00_S10_150604
    File : fdl1.bin
    File : fdl2.bin
    File : nvitem.bin
    File : nvitem_wcn.bin
    File : prodnv.img
    File : u-boot-spl-16k.bin
    File : SC7702_sc7731g_band128.bin
    File : DSP_DM_G2.bin
    File : SC8800G_x30g_wcn_dts_modem.bin
    File : boot.img
    File : recovery.img
    File : system.img
    File : userdata.img
    File : Logo.bmp
    File : Logo1.bmp
    File : cache.img
    File : u-boot.bin
    
    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    3. Insert cable
    
     ====  Wait for phone...
    
    Phone found! [ 26 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    
    FlashMode Set : Ok!
    PMTManager : Load 0x18 records
    PMTManager : PMT Update Ok!
    Flashing now
    
    [FlashProc] : CODE  
    Current ID : PRODNV
    Current File : prodnv.img
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : ERASE 
    Current ID   : ERASEUBOOT
    Current Part : uboot
    [FlashProc] : Ok!
    
    [FlashProc] : BOOTCODE
    Current ID   : SPLLOADER
    Current File : u-boot-spl-16k.bin
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : CODE  
    Current ID : MODEM_W
    Current File : SC7702_sc7731g_band128.bin
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : CODE  
    Current ID : DSP_W
    Current File : DSP_DM_G2.bin
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : CODE  
    Current ID : MODEM_WCN
    Current File : SC8800G_x30g_wcn_dts_modem.bin
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : CODE  
    Current ID : BOOT
    Current File : boot.img
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : CODE  
    Current ID : RECOVERY
    Current File : recovery.img
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : IMAGE
    Current ID : SYSTEM
    Current File : system.img
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : IMAGE
    Current ID : USERDATA
    Current File : userdata.img
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : CODE  
    Current ID : BOOTLOGO
    Current File : Logo.bmp
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : CODE  
    Current ID : FASTBOOT_LOGO
    Current File : Logo1.bmp
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : ERASE 
    Current ID   : FLASH
    Current Part : wruntimenv1
    [FlashProc] : Ok!
    
    [FlashProc] : ERASE 
    Current ID   : FLASH_WCN
    Current Part : wcnruntimenv1
    [FlashProc] : Ok!
    
    [FlashProc] : IMAGE
    Current ID : CACHE
    Current File : cache.img
    Flashing now ... 
    [FlashProc] : Ok!
    
    [FlashProc] : ERASE 
    Current ID   : ERASEMISC
    Current Part : misc
    [FlashProc] : Ok!
    
    [FlashProc] : ERASE 
    Current ID   : ERASESD
    Current Part : internalsd
    [FlashProc] : Ok!
    
    [FlashProc] : BOOTCODE
    Current ID   : UBOOTLOADER
    Current File : u-boot.bin
    Flashing now ... 
    [FlashProc] : Ok!
    
    
    Elapsed: 00:48:46
    
    Reconnect Power/Cable!

  7. #7
    Administrator
    Join Date
    Apr 2015
    Posts
    197
    Post Thanks / Like
    Rep Power
    10

    Default Econnect HM71 Tablet Flashing





    Code:
    Scatter Load Ok , BaseBand : MT6582 , Project : joyasz82_tb_kk , Storage : EMMC
    Files found : 12 , Set to Flash : 11
    Ready to Flash!
    
    Operation : Flash [ v1.44 ]
    
    ======= Flash
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 4 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6582
    BB_CPU_NME : [MediaTek] MT6582_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x87
    NAND Flash : NOT INSTALLED
    eMMC Flash : 8801034E436172642041F519A322A213
    Initialize Memory ... 
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x88 , OEM : 0103
    [eMMC] : FLASH_INF : [FORESEE] , draC
    [eMMC] : FLASH_CID : 8801034E436172642041F519A322A213
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00020000
    [eMMC] : FLASH_LEN : 0x00000001CE100000
    [eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
    DEV RID    : 332521A1EDEC519C89C72BD6E3897BC3
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    ScatCFG : BaseBand : MT6582 , Project : joyasz82_tb_kk , Storage : EMMC
    Setting : Flash Pre-Erase (Safe) : Enabled
    Setting : AFF verify :  Enabled
    Setting : HW verify :  Enabled
    
    BL : Check HW compatibility
    BL : BBID supported by BootLoader!
    BL : Check eMMC compatibility
    BL : Only one records found, and determined as universal
    BL : eMMC supported by BootLoader!
    
    BL : BatteryLevel : 3961 mV
    BL : BatteryLevel Ok
    
    BL : Flash Pre-Erase
    Total blocks to Erase : 2
    Erase : 0x0000000001400000-0x0000000000100000
    Erase : 0x0000000003100000-0x000000007D280000
    Flash Pre-Erase Done, time used : 00:00:07
    
    SecCfg Passed , 1799
    BMT remark not need. Will skip
    Sending Preloader ... 
    Use : preloader_joyasz82_tb_kk.bin
    Preloader Sent , Init passed
    SecCfg Passed , 1799
    PartCount : 0014
    Update PMT by user request
    Repartition Done!
    
    Processing : Flash Write
    Flash now : MBR
    Image Flash Ok
    Flash now : EBR1
    Image Flash Ok
    Flash now : UBOOT
    Image Flash Ok
    Flash now : BOOTIMG
    Image Flash Ok
    Flash now : RECOVERY
    Image Flash Ok
    Flash now : SEC_RO
    Image Flash Ok
    Flash now : LOGO
    Image Flash Ok
    Flash now : EBR2
    Image Flash Ok
    Flash now : ANDROID
    Image Flash Ok
    Flash now : CACHE
    Image Flash Ok
    Flash now : USRDATA
    Image Flash Ok
    Flash Write Done, time used : 00:01:19
    
    Processing : Verify
    Verify Passed : MBR
    Verify Passed : EBR1
    Verify Passed : UBOOT
    Verify Passed : BOOTIMG
    Verify Passed : RECOVERY
    Verify Passed : SEC_RO
    Verify Passed : LOGO
    Verify Passed : EBR2
    Verify Passed : ANDROID
    Verify Passed : CACHE
    Verify Passed : USRDATA
    Data Verify Done, time used : 00:00:02
    
    Update Mirror PMT
    Update Done!
    
    Update RomInfo done
    
    Done!
    Elapsed: 00:01:49
    Reconnect Power/Cable!

  8. #8
    VIP MEMBER
    Join Date
    Apr 2010
    Location
    Bangladesh
    Posts
    174
    Post Thanks / Like
    Rep Power
    10

    Default

    Code:
    Dead Mode is Selected
    Waiting for USB device...
    1. Phone should be Off!
    2. Battery must be charged and inserted! ( if not used external power )
     - > If phone can't switch to BL - use battery or flash from Local mode!
    
    --- Insert USB cable now! ---
    Wait for phone...
    Phone found! [ 40 ]
    Sync...
    Sync Ok, read regs...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 625A
    BB_CPU_HW : CA01
    BB_CPU_SW : 0001
    BB_CPU_SB : 8000
    BB_CPU_NM : [MediaTek] MT6250_S0001
    BB_CPU_SN : D6737A97BE0ED7F1903E12756EEBE0BC
    BROM Protocol Version : 05
    BROM Status : 1012
    Comm Status : 0000
    EXBL Status : Alive [ USB Load Active ]
    Switch to BL done
    BL Version : 01
    Setting...
    Setting done , result code 0x8000
    Project ID : Rivendell.14.00.11.p1
    BROM/BL stage done
    Seek and prepare DownloadAgent
    DownloadAgent matching HW Found!
    DA verify and select done
    Sending DA to target ...
    DA_eMP_Rivendell.fg
    DA_VERIFY : 00
    DA_JUMP   : 00040000
    DA_AUTH   : Passed!
    DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
    DA_CSTAT  : 0x5A
    SOC_VERIFY : 0xC1
    BOOT_STYLE : SF_FLASH_BOOT
    NOR Flash IC initialized
    [0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
    [0] : FLASH_DIE : 00C2 0025 0038 0000 
    [0] : FLASH_LEN : 0x01000000
    FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
    
    Executing FFS FORMAT now...
    FAT_RANGE : 0x00A60000-0x00FF3FFF , LEN : 0x00594000
    DA_RET   : DA_IN_PROGRESS
    DA_RET   : FORMAT_DONE
    
    Connect phone on selected interface...
    [/CENTER]
    Last edited by ASMFARUQUE; 05-14-2016 at 11:16 PM. Reason: sorry! wrong section post
    BR,

    ASM_FARUQUE

    If My Post Is Helpful-

    Just Press On THANKS

  9. #9
    Administrator
    Join Date
    Apr 2015
    Posts
    197
    Post Thanks / Like
    Rep Power
    10

    Default Walton Primo F6 FRP reset done

    Code:
    Card found : S/N : 42Axxxx , v0130
    Chinese Miracle II  [MTK module] v 1.46
    
    Operation : Format FileSystem [ v1.46 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 6 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6580
    BB_CPU_NME : [MediaTek] MT6580_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x94
    NAND Flash : NOT INSTALLED
    eMMC Flash : 150100513732534D42001CD1C8CC3221
    Initialize Memory ... 
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , BMS27
    [eMMC] : FLASH_CID : 150100513732534D42001CD1C8CC3221
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID    : 21CC7E511CAC0AE43A97210713D692D1
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    
    Clear FRP ( Google Reset Protection )
    Clear Ok!
    
    Done!
    Elapsed: 00:00:12
    Reconnect Power/Cable!

  10. #10
    VIP MEMBER
    Join Date
    Apr 2010
    Location
    Bangladesh
    Posts
    174
    Post Thanks / Like
    Rep Power
    10

    Default

    MEDIACOM PHONE-PAD DUO M-PPAS531
    STUCK RECOVERED BY USING SCAN APPs




    Operation : Check / Read Info [ v1.47 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 3 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6592
    BB_CPU_NME : [MediaTek] MT6592_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x8A
    NAND Flash : NOT INSTALLED
    eMMC Flash : 15010051385853414206613BE466328F
    Initialize Memory ...
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , BASX8
    [eMMC] : FLASH_CID : 15010051385853414206613BE466328F
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003A3E00000
    [eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
    DEV RID : 6E6CA4DA7A4EEAAA0B807A2B14B2FE09
    INT RAM : 0x00020000
    EXT RAM : 0x40000000
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand : MTK/6592M
    ProdName : S531
    ProdModel : M-PPxS531
    Device : PhonePadDuo
    AndroidVer: 4.4.2
    MTKxCPU : MT6592
    MTKxPRJ : S3559_DS35592_MEDIACOM-M-PPXS531_L101

    SECURITY :
    IMEI_SW [1] : 867670020227163
    IMEI_SW [2] : 867670020258069
    BTMAC Addr : 72A74665926A
    WiFi MAC : 700BC08C00E3

    MODEM :
    BaseBand : MT6592_S00_MOLY_WR8_W1315_MD_WG_MP_V62_P20_1_wg_n

    EXTRA :
    LCD [0] : hx8394d_hd720_dsi_vdo_s35
    LCD [1] : otm1287_hd720_dsi_vdo_boyi_s35
    LCD Res : 1280x720
    TOUCH [0] : GT915M_S35
    CAM [0] : ov13850_mipi_raw_s35_sunwin
    CAM [1] : ov8858_mipi_raw_sunwin
    CAM [2] : ov5670_mipi_raw_s35
    CAM [3] : gc2355_mipi_raw_s35
    MODEM : s3598_modem
    LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hi_IN ur_PK bn_IN

    Done!
    Elapsed: 00:00:12
    Reconnect Power/Cable!


    Operation : Scan APPs [DDirect] [ v1.47 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 3 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6592
    BB_CPU_NME : [MediaTek] MT6592_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x8A
    NAND Flash : NOT INSTALLED
    eMMC Flash : 15010051385853414206613BE466328F
    Initialize Memory ...
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , BASX8
    [eMMC] : FLASH_CID : 15010051385853414206613BE466328F
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003A3E00000
    [eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
    DEV RID : 6E6CA4DA7A4EEAAA0B807A2B14B2FE09
    INT RAM : 0x00020000
    EXT RAM : 0x40000000
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    DDirect : Init Ok!
    Scanning FileSystem now , please wait
    Collect and verify data according Dictionary
    Collect done : 0x0001
    [DDCleaner Info] : Files to remove : 1
    [DDCleaner Info] : Additional garbage detected : 0
    Removing files ...
    [DDCleaner] : Removed 1

    Special Op #1 : Clear Recovery Data Ok!
    Special Op #2 : Clear UserData Ok!
    Special Op #3 : PostFix Ok!
    All Done!


    Done!
    Elapsed: 00:01:33
    Reconnect Power/Cable!

    BR,

    ASM_FARUQUE

    If My Post Is Helpful-

    Just Press On THANKS

Page 1 of 6 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 6 users browsing this thread. (0 members and 6 guests)

Similar Threads

  1. Replies: 2
    Last Post: 11-20-2016, 03:19 PM
  2. Replies: 2
    Last Post: 09-11-2016, 02:17 PM
  3. Replies: 0
    Last Post: 01-13-2016, 11:29 AM
  4. Successfully unlocked/repaired phones by Infinity-Box
    By Bidhan_mobile in forum Infinity-Box
    Replies: 3
    Last Post: 09-19-2015, 01:29 PM
  5. Replies: 1
    Last Post: 06-18-2015, 01:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •